GRĒ-TAN RIFLES

I want to tell you about my experience with firing pin springs. The gun is a Stiller Viper LV in 6ppc with Krieger barrel. I installed...

Because Greg builds chambers the way you prep your brass and the depth you seat your chosen bullet, he requires a dummy round. If you...

Another critically important accurizing detail is insuring that the barrel threads are parallel to the bore and chamber and equidistant...

Bolt sleeving is not new to the gunsmithing industry. It was tried and used by other smiths before I came along. What set me apart has...

Bushing the firing pin hole and turning the firing pin sounds small but this one operation to the bolt has so many benefits it's hard to...

How to send your bolt in: Bushing the firing pin hole and turning the firing pin sounds small but this one operation to the bolt has so...