Bad Machining
- Jul 24, 2017
Bad Barrel Work
The barrel on the left is Greg's work. The barrel on the right is what someone did to a new barrel and charge for it as an precision...
Damaged Bolt Face
- Jul 24, 2017
Ruger 223
This is a Ruger 223 bolt face with erosion from leaking primers. Along with the larger diameter bushing to clean up the damage the F/P...
Rebuild damaged bolt face.
- Jul 24, 2017
Rebuild Bolt Face
A Winchester bolt sent in after having been bushed by someone else. The bushing was made of a soft material. Also a huge hole was bored...
Repair severely damaged bolt face.
- Jul 24, 2017
Repair Bolt Face
This Rem 722 bolt came in with no explanation as to what happened. I didn't ask. It looks like someone tried to remove a case swelled...
Install mini M16 extractor.
- Jul 24, 2017
Mini M16 Extractor, 70 Winchester
This is a Model 70 Winchester Push feed with a Standard bolt face. You can see I installed a Mini M-16 extractor and Bushed the firing...
Youtube Video Dummy Round or Factory Round
- Jul 24, 2017
YouTube: Video Making A Dummy Round
Because Greg builds chambers the way you prep your brass and the depth you seat your chosen bullet, he requires a dummy round. If you...
Threading a Barrel
- Jul 24, 2017
Concentric Threading
Another critically important accurizing detail is insuring that the barrel threads are parallel to the bore and chamber and equidistant...
Double Sleeve Bolt Body
- Jul 24, 2017
Double Sleeve Bolt Body
Bolt sleeving is not new to the gunsmithing industry. It was tried and used by other smiths before I came along. What set me apart has...
Fix your cratering and piercing problems
- Jul 24, 2017
Bush Firing Pin Hole & Turn Pin $80.00
Bushing the firing pin hole and turning the firing pin sounds small but this one operation to the bolt has so many benefits it's hard to...
Lite Firing Pin Assemblies
- Jul 24, 2017
