Phone: 970-878-5421

Fax: 970-878-5420

Please reload

Follow Us

August 27, 2019

I want to tell you about my experience with firing pin springs. The gun is a Stiller Viper LV in 6ppc with Krieger barrel. I installed one of your firing pin springs with a shim to give 23.2 pounds at cocked length. Pin fall is .220", protrusion is .060". August 2018 a...

August 3, 2017

THANKS GREG!  

THIS 270 WIN SHOOTS ABOVE AND BEYOND OUR GOALS AND EXPECTATIONS.  I NEVER NEW A LIGHT WIEGHT HUNTING RIFLE COULD SHOOT SO WELL.  WE WERE HOPING FOR A HALF MIN HUNTING RIFLE THIS RIFLE SHOOTS QUARTER MOA EASY UNBELIEVABLE THANK YOU.

August 3, 2017

Hi, I had sent my Savage 25 to you to ream it to 22 K Hornet and thread the barrel for a suppressor earlier this year. I wanted to say thank you for such a great experience. As this was the first time I've sent a rifle off for custom work, I was fairly nervous. You ans...

July 27, 2017

Greg, here is a picture of the defiance devient 300 WSM pistol completed. I'm still developing loads for it but so far it has shot 5 shots at 100 yds into .280".

Thanks,

Bart Ott

July 24, 2017

The barrel on the left is Greg's work. The barrel on the right is what someone did to a new barrel and charge for it as an precision gunsmith. Unfortunately this was a new barrel that was put on the action. I understand making a mistake. But not correcting the mistake...

July 24, 2017

This is a Ruger 223 bolt face with erosion from leaking primers. Along with the larger diameter bushing to clean up the damage the F/P hole was made 0.0625 and the pin turned.

A Winchester bolt sent in after having been bushed by someone else. The bushing was made of a soft material. Also a huge hole was bored into the face and very deep. The support for the back of the bushing was so thin it was setting back in the bolt. Also the firing pin...

This Rem 722 bolt came in with no explanation as to what happened. I didn't ask. It looks like someone tried to remove a case swelled into the bolt face and drill it out. I re-built the bolt face & installed a Sako extractor.

This is a Model 70 Winchester Push feed with a Standard bolt face. You can see I installed a Mini M-16 extractor and Bushed the firing pin hole. The reason for this was, someone had machined on the bolt and opened up the bolt face diameter. The case would slide out fro...

Because Greg builds chambers the way you prep your brass and the depth you seat your chosen bullet, he requires a dummy round. If you have more than one bullet, he needs a dummy round for each. He then chambers to the longest throat length. If you are going to shoot fa...

Please reload

August 3, 2017

August 3, 2017

July 27, 2017

July 24, 2017

July 24, 2017

July 24, 2017

July 24, 2017

Please reload

Recent Posts
Search By Tags
Featured Posts

I'm busy working on my blog posts. Watch this space!

Please reload

WRONG PAGE - BLOG CONTENT IS DISPLAYED UNDER TESTIMONIALS

  • Facebook - Black Circle
  • Twitter - Black Circle
  • Google+ - Black Circle