GTR's new Aluminum Bolt Shroud; Silver. The Bolt Shroud is made with 7075-T6. Made in house on our Swiss CNC's. We have bolts from the 1940's to present and were able to adjust the thread, bushing collar and height of the shroud flats to give the best fit in the industry. On average, we are.010 larger in the areas to take out the sloppy fit. We have a better fit of the cocking piece and firing pin to the shroud to prevent binding in the cocked position. Then we have them NORGUARD Nickel Plated to give the best-finished aluminum shroud in the industry. The threads and internals are protected to leave the smooth Nickel Plate and the exterior is bead blasted for the matte stainless finish in the plating process to match the matte stainless steel Remington actions.
 
FITS; 700 Long and Short, 721, 722, 40X
 
Our Bolt shrouds do not fit PTG bolts, if you purchase one of our shrouds for their bolts it has to be fitted. Greg use to do this for free, but no longer does. At this time he has no manual lathes in the shop. If you have a good gunsmith or machinist he may be able to do that for you. If your gunsmith needs advice on how to do it, he can call us for advice. But he is responsible for the results.