GTR's new Aluminum Bolt Shroud; Matte. The Bolt Shroud is made with 7075-T6. Made in house on our Swiss CNC's. We have bolts from the 1940's to present and were able to adjust the thread, bushing collar and height of the shroud flats to give the best fit in the industry. On average, we are.010 larger in the areas to take out the sloppy fit. We have a better fit of the cocking piece and firing pin to the shroud to prevent binding in the cocked position. Then we have them Type III Hard Coat Anodized Black to give the best-finished aluminum shroud in the industry. The threads and internals are protected to leave the smooth Hard Coat finish and the exterior is bead blasted for the matte black finish in the anodizing process to match the Varmint / Tactical Remington actions. FITS; 700 Long and Short, 721, 722, 40X

Our Bolt shrouds do not fit PTG bolts, if you purchase one of our shrouds for their bolts it has to be fitted. Greg use to do this for free, but no longer does. At this time he has no manual lathes in the shop. If you have a good gunsmith or machinist he may be able to do that for you. If your gunsmith needs advice on how to do it, he can call us for advice. But he is responsible for the results.