BARREL MUZZLE @ CHUCK


"THESE UNITS ARE CUSTOM MADE FOR EACH ORDER. ORDERS MUST BE PHONED IN." 970-878-5421


This barrel adapter was designed for the gunsmith whose method of chambering is to hold the barrel muzzle in a chuck or collet, at the head stock and a steady rest at the chamber end for the BMC. And for the gunsmith with a larger lathe that holds the breach end of the barrel with a 4 jaw and the muzzle is inside the spindle bore. The BMC Modified is for this setup. What was thought to be impractical and not worth the effort with this style of set up, has now been engineered to a practical, efficient, simple, and hassle free tool to enhance your chambering quality.

The BMC & BMC Modified will work with spindle bore's as small .750 to as large as need be. The spindle bore of your lathe must be given at the time of order for correct fit. One size does not fit all spindles. The BMC works on .14 through .50 cal. barrels with no parts interchange. The two units have a rubber tip to seal on the barrel bore for a no leak operation from start to finish! The BMC needs no adjusting from start to finish and does not dedicate lathe to chambering. On and off in less than a minute. Best of all it DOES NOT LEAK!

Price starts at $385.00 
Standard $5.00 shipping does not apply to this product, actual shipping will be charged.