Please Note - for the security of our customers we now only accept online orders where the billing and shipping address match. If you need your order shipped to an alternate address you MUST call us at 970-878-5421
We are having PROBLEMS WITH OUR PHONE SYSTEM at the present time. We are located in the mountains and they are having problems fixing it. It will work sometimes when it warms up during the day. We value your business so feel free to contact us through email. We do check our email through out the day. You can still place orders through our website.
WRONG PAGE - BLOG CONTENT IS DISPLAYED UNDER TESTIMONIALS
A Winchester bolt sent in after having been bushed by someone else. The bushing was made of a soft material. Also a huge hole was bored into the face and very deep. The support for the back of the bushing was so thin it was setting back in the bolt. Also the firing pin...
This Rem 722 bolt came in with no explanation as to what happened. I didn't ask. It looks like someone tried to remove a case swelled into the bolt face and drill it out. I re-built the bolt face & installed a Sako extractor.
This is a Model 70 Winchester Push feed with a Standard bolt face. You can see I installed a Mini M-16 extractor and Bushed the firing pin hole. The reason for this was, someone had machined on the bolt and opened up the bolt face diameter. The case would slide out fro...