PAGE UNDER CONSTRUCTION

    "Varmint Hunting with Night Vision"

DVD by GTR Production's

As of 9/05/08 Greg is editing the DVD. This is a total night vision DVD filmed with a camera and night vision

equipment put together by Greg. This is coyote hunting at night with total night vision. People that have seen the

footage so far unedited for the DVD are simply amazed and have purchased Night Vision equipment and have

the same success that Greg has had.

___________________________________________

Gunsmithing DVD's By GTR Tooling

  "Action Blueprinting" - 2 DVD's / 4 Hrs.  $58.00 shipping included

    No other video ever made, comes close to this Hi-tech in depth look at what is involved to blueprint an action. This video is not candy coated. It reveals the inherent gross misconceptions of action truing with facts and dial indicators.

    All machining is single point, including the recutting of the threads. An in-depth instruction section on setup of the threading tool bit and how to pickup the internal thread in an action for recutting for professional truing of threads. Not the back yard butcher method of using a tap.

    The setup of actions in this video are explained in depth, then shown with dial indicators. FACTS are the only subject in this video! Not what someone believes in. This video shakes the foundation on what pretenders, self proclaimed machinists preach, but have no concept on axial alignment. What someone thinks and what someone knows are two different ball games. Hard ball is played in this video. Knowledge is the umpire. If the truth scares you don't purchase this video.

    The fresh machined action without any lapping to the lugs, wipes 100% of magic marker off of the recoil lugs in the action. With a 5 digit after the decimal depth micrometer, the action measures to within 50 millionths, or 1/2 of 1/10,000 across the bolt face from the receiver face.

                         Tool room precision is the only subject presented, not B.S.

_____________________________________________________________________________

  "Bolt Sleeving Video" - 2 DVD's / 2 Hrs. 30 mins.  $55.00 shipping included

    The start of this video shows the bolt lug deflection off of the receiver lug. This when seen, will open your eyes to the next step in accurizing. Also it makes it easy to understand and explain to your customers.

    Next the use of the action bolt bore reamer/mandrel is shown and demonstrated on an action that is being blue printed and double sleeves on the bolt.

    Then the nitty gritty of sleeving a bolt body. All setups for machining are shown from the start to finish on the bolt. A double sleeve is what is installed, and how to setup so the firing pin hole is held dead center of the chamber.

    Sleeving bolts for actions that are not having the bolt bore raceway rebored, is explained. Also what and why when sleeving a competition action, veers the elk rifle. The tape ran out, and tape two was made to properly finish up the small details that only through time, money, and experience!

_____________________________________________________________________________

  "Tailstock Alignment For Reaming" - 1 DVD / 50 mins. $41.00 shipping included

    As mentioned above, there is a required alignment procedure for tailstocks. Along with this, to achieve repeatability when moving the tailstock for dept of cut, like head space readings, the tailstock has to come back into axial alignment when slide back up the barrel for resuming the reaming operations.

    This video shows how to dial in the tailstock along with the why the turning of a shaft for alignment is fighting and ruining all your efforts for flawless precision in the chamber reaming operation.

_____________________________________________________________________________

  "Sako Extractor Install" - 1 DVD / 1 Hr. 59 mins. $25.00 shipping included

    This video covers installation of all styles of Sako extractors, that can be used for all suppliers. It covers set up and machining of the bolt. It also covers problems associate with this style of extractor and what to do and not to do to extractor to through the case out, not up at the scope.

_____________________________________________________________________________

  "G.T.R. High Pressure Pump" - 1 DVD / 2 Hrs.  $31.00 shipping included

    Whether you purchased a flushing system from G.T.R. or built your own. You will want this full information video, which will save you time & money. Topics covered in this Topics covered in this two hour video include: high pressure pumps ~ motors ~ fittings ~ pressure relief valves ~ coolant tanks ~ tubing ~ line routing ~ accessory manifolds ~ motor mount fixtures for pump & motor ~ lathe chip pan prep ~ reamers (piloted and unpiloted, as well as carbide) ~ cutting fluids ~ water-sol oil ~ mineral oil.